Tech Tips (by ALLDATA): Land Rover rear suspension sags after replacing battery
TECH TIPS (courtesy of ALLDATA)
Problem: After replacing the battery, the customer noticed the rear suspension was lower than normal. The tech retrieved a DTC C1131 – an Air Spring Air Supply code from the Suspension Module.
Details: The tech visually inspected the system for air leaks and checked the reservoir valve block pipes for correct routing and installation. He did not find any issues.
Confirmed Repair: The ALLDATA Tech-Assist consultant recommended performing a steering angle sensor relearn procedure. The procedure was simple – turn the steering wheel from lock to lock. After performing the relearn procedure, the tech cleared the DTC. The ride height went back to normal and the problem was resolved.